CM4bootfromUSB

2022年7月27日—IhaveamcurrentlyabletobootmyCM4fromanSSDconnectedtoUSBviaPCIe.UnfortunatelyIforgotthestepsIhadtotakentomakethis ...,Isthereanyfixforthis?Theonlyissuehereiswhenbooting.IftheCM4hasraspbianrunning,thenallconnecteddevicesbehindthePCIeswitchworksfine.,2021年9月14日—*BootthePiintoMassStorageDevice(MSD)mode,andthisisdonebyconnectingitbyUSBtoanothercomputerandrunningrpiboot-dmsd ...,Thed...

參考資訊如下
Booting CM4 from SSD connected to USB via PCIe

2022年7月27日 — I have am currently able to boot my CM4 from an SSD connected to USB via PCIe. Unfortunately I forgot the steps I had to taken to make this ...

Booting from USB behind PCIe switch

Is there any fix for this? The only issue here is when booting. If the CM4 has raspbian running, then all connected devices behind the PCIe switch works fine.

CM4 boot sequence, how configure and how install OS

2021年9月14日 — * Boot the Pi into Mass Storage Device (MSD) mode, and this is done by connecting it by USB to another computer and running rpiboot -d msd ...

CM4 USB Mass Storage Boot

The default CM4 bootloader config will try EMMC first then PCIE XHCI if available. You'll need to use rpiboot to update the bootloader to get boot support for ...

CM4 USB MSG Flashing

2023年6月8日 — I have designed a custom board, for CM4 Lite, the board has an mSATA drive, and it is booting from this drive successfully, but if I want to ...

How to flash Raspberry Pi OS onto the Compute Module 4 ...

2020年11月3日 — USB slave port connection, disconnect power, then remove the eMMC Boot disable jumper on J2. Then plug power back in, and the CM4 should now ...

Raspberry Pi CM4 資料傳輸及OS 安裝

... CM4 擴充板, 及USB 線). 注意. ○ 板載堆疊型USB 連接器有上下兩個USB 接口，資料傳輸及OS 安裝須接在. 上面的USB 接口. ○ 電源需要DC 12V / 2A。 2. 安裝rpiboot_setup ...